Fir floors are one of the most gorgeous flooring found in many homes throughout North America. It had been one of the most popular types of flooring installed here for decades due to its easy availability. But fir floors have many unique characteristics when compared with true hardwood floors like white and red oak. This means the look and operation of the floor will differ considerably from those of an oak floor. If you would like to be completely pleased with your flooring, then understanding these differences is actually important. To begin with Fir is about 100 percent more Vulnerable to impact damage than white or red oak. The wood flooring business has a guide to inform the density of different kinds of wood known as the Jana Hardness Scale. This test measures the force required to embed a.444 inch steel ball to half its diameter in various types of wood.
With this scale, white oak rates at 1360, red oak 1290 and fir in the base with a diminished 660. Since they are so soft, fir floors are far more challenging to refinish. Good care has to be taken to ensure the amount of timber is removed during the process. This takes a whole lot of expertise. This is one of the simplest floors to mess up in case you do not understand what you are doing. Many fir flooring become destroyed by very deep drum marks due to inexperienced hardwood flooring refinishing companies. Once these drum on marks caused by leaving the drum sander in one place too long are created, the only way to eliminate them would be to sand the surrounding regions flat to the exact same depth. This takes decades off the life span of a ground and in cases of thin flooring; it may mean having to replace large sections with reclaimed wood.
Fir is not the sort of flooring lancaster to practice on your own sanding abilities. Refinished fir floors often exhibit another attribute called mottling or bruising. The area of the bruising can differ greatly from room to room and even from area to area within one room. In high traffic areas or close to the perimeter of a space, the fir frequently shows darker, blotchy areas. Most of this is due to several years of foot traffic and wear. The structure of cells and fibers in soft fir is extremely different to hardwoods like walnut. As traffic makes its way throughout the floor over several decades, fir gets bruised and this shows up as darker, blotchy areas from the ground. It is not uncommon to be able to tell where furniture was placed for several years in a space. You will have the ability to find a light patch that is precisely the size of a bed or dresser surrounded with a darker area which reveals the occupants walking path.